You should perform a weekly cleaning routine on a Pepsi Electric Cooled Fountain. The video below will show you how to do this:



Or if you prefer not to watch a video, these are the steps:

  • Turn the key switch to the off position
  • Remove the nozzles and diffusers for all valves by turning them counter clockwise and pulling down
  • Separate each nozzle from its diffuser and rinse all parts with warm water
  • Soak the nozzles and diffusers in sanitizing solution for 60-90 seconds
  • Remove the nozzles and diffusers from the sanitizing solution and allow to air dry on a clean surface
  • Brush under each valve with a dedicated cleaning brush and sanitizing solution
  • Pour remainder of sanitizing solution over the cup rest and down the drip tray drain
  • Put the nozzles and diffusers back on the valves, ensuring that the diffuser is facing the correct direction and the nozzle is not cross-threaded
  • Turn the key switch to the on position
  • Tap each cup lever to flush out any residual cleaning solution into a cup or drain