You should perform a weekly cleaning routine on a Pepsi Spire Fountain. The video below will show you how to do this:



Or if you prefer not to watch a video, these are the steps:

  • Remove the nozzle and diffuser by turning them counter clockwise and pulling them down
  • Separate each nozzle from its diffuser then brush and rinse all parts with warm water
  • Soak the nozzle and diffuser in sanitizing solution for 60-90 seconds
  • Remove the nozzles and diffusers from the sanitizing solution and allow to air dry on a clean surface
  • Brush under the valve with a dedicated cleaning brush and sanitizing solution
  • Remove the bin covers and wash both sides of the cover in the sink then allow to air dry
  • Remove all ice from bin
  • Fill a labeled and dedicated spray bottle with sanitizing solution and spray the interior of the ice bin then scrub with dedicated brush soaked in sanitizing solution
  • Thoroughly rinse the ice bin with warm water and allow to air dry
  • Pour remainder of sanitizing solution over the cup rest and down the drip tray drain
  • Reassemble the diffuser and nozzle with the white rubber seal facing up and with the notches matching up with the tabs and re-install the nozzle assembly
  • Re-fill the ice bin with ice and re-install the ice bin cover
  • Press the pour button to flush out any residual cleaning solution into a cup or drain