You should perform a weekly cleaning routine on a Pepsi Electric Cooled Fountain. The video below will show you how to do this:

Or if you prefer not to watch a video, these are the steps:

• Turn the key switch to the off position
• Remove the nozzles and diffusers for all valves by turning them counter clockwise and pulling down
• Separate each nozzle from its diffuser and rinse all parts with warm water
• Soak the nozzles and diffusers in sanitizing solution for 60-90 seconds
• Remove the nozzles and diffusers from the sanitizing solution and allow to air dry on a clean surface
• Brush under each valve with a dedicated cleaning brush and sanitizing solution
• Pour remainder of sanitizing solution over the cup rest and down the drip tray drain
• Put the nozzles and diffusers back on the valves, ensuring that the diffuser is facing the correct direction and the nozzle is not cross-threaded
• Turn the key switch to the on position
• Tap each cup lever to flush out any residual cleaning solution into a cup or drain